P.S. I still use tin cans as a source of sheet metal. There was a big storm a while ago, with tree branches whistling by at high speed. (Not a good time to be outside.)
Three holes were punched in the house by the branches, 1-2 inches in diameter. What to do, what to do. I took a coke can, slit it and unrolled it into sheet metal. Then cut a disk bigger than the hole, and epoxied it into place. Worked like a charm, and cost nothing.
I've used coke can metal for shingles and flashing, too. They don't rust.
In other words: it rusts, but it doesn't rust like iron. It rusts in a much less destructive way because the aluminum oxide protects the rest of the aluminum from oxygen
It is really called low energy, it refers to the low attractive force of the surface, liquids bead up and do not wetten, in epoxy that results in small contact area and a weak bond, on a high surface energy material it flows into all the crannies and has enormous contact area and a strong bond.
Three holes were punched in the house by the branches, 1-2 inches in diameter. What to do, what to do. I took a coke can, slit it and unrolled it into sheet metal. Then cut a disk bigger than the hole, and epoxied it into place. Worked like a charm, and cost nothing.
I've used coke can metal for shingles and flashing, too. They don't rust.